AM23360 Mill-Tech / Roll-Kraft Tube Mill

Mill-Tech / Roll-Kraft Tube Mill Direct Shaft Drive - AM23360

Capabilities:

Tube OD (Maximum): 6” approx. / 4.5" square approx.

• Strip Width (Maximum): 26" approx. CL
  • Distance Between Passes: 24" approx. CL
  • Max Upper Roll Height: 32.875" approx. CL
  • Min upper roll Height: 23.125" approx. CL
  • Lower Roll Height: 14.125" approx. CL
  • Key size: .625"
• Shaft OD: 4"

Includes:

• Primary Welder – Thermatool VT-160
• Shear and Seam Welder
• American Uncoiler max. OD 72" OD x 24" ID / 20" ID min.
• Forming Mill Includes:
  • (8) Forming Roll Stands
  • (6) Side Roll Stands
• Mandrel Anchor
• Sizing Mill Includes:
  • (3) Size Roll Stands
  • (3) Vertical Adjusting Side Roll Stands
  • (1) Turks Head Round + (1) Turks Head Square
• Cut-Off Press with Double Cut Type Die Set – Alpha Industries
  • Model: FR-32-3-56
  • Serial 1239428
  • Stroke: 14"
  • Capacity 8" x .--- wall @ 1-- FPM
• Control Console with Push Buttons and Displays
• Vertical Expander for Weld Test
• Run-Out Table – with Stacking Hoist & De-Dimpling
• Metco Flame Spray with Dust Collector
• Recirculating Pump & Heat Exchanger

Tooling:

• Ask

Electrical:

• Main Drive Motor: (1) 150-HP
• 480 Volt / 3 PH / 60 HZ